QUAD: A story well worth reading

Quality Control, For A Quality Sound

Pictured is an image from the late ’50s of the final hand-finished assembly process after mylar stretching and cabinet construction.

Although manufacturing is achieved today on a much larger scale, the same approach to quality has never faltered. Many processes from circuit board assembly to piano gloss finishing use hand-finished techniques, with quality control procedures each step of the way.

Matching wood-veneered panels now adorn the top of the speakers and the sides of their substantial bases, formed from high-density plywood to further damp frame resonances and smothered in layers of piano lacquer. The shielding cover on the base is embossed with the Quad logo and all typography is now in gold lacquer paint; the gold-plated cable terminals, corresponding PCBs and wiring have also been enhanced.

Technology

Attention To Details

Attention is paid to the power supply section, especially the stators. Each stator consists of a layer of copper on a thin, insulating backing, which is punched with a pattern of holes to make it transparent to sound. The copper is etched to provide a conductive pattern which is necessary to re-create the point source attributes of the Quad ESL. After etching, the copper needs to be insulated from the diaphragm, which will lie in close proximity to it.

In the 2812 and 2912, the insulation is created by a triple coating utilizing a specific spraying technique that is perfected to avoid degradation of the EHT charge under high dynamic conditions, where the diaphragm comes into close contact with the stator. These latest versions of the Quad ESL can thus play louder and handle more power than the previous models.

Technology

Precision Engineering

Quad’s engineers have evaluated the power supply for the EHT voltage. Creepage, the possibility of charge flowing across the PCB between components, was eliminated by a new PCB layout which ensured optimum insulation and distance between contacts and a symmetrical layout for the components. This new layout also provides a means to superior cable dressing and again reducing the effects of creepage, particularly in high humidity environments.

Component changes have also been introduced, including such audiophile components as Vishay resistors and Murata capacitors. Although not in the signal path, as such, these components have a direct effect on the consistency of the EHT supply and signal purity is created in the reproduction of music as a result.

Technology

Final Touches

Finally, to match the improved dynamics of the ESL elements, the mechanical aspects of the speakers have been enhanced. A new net cloth has been chosen to cover the elements which allow superior audio transparency as well as improving the appearance of the speakers. The underlying grille support has revised strengthening ribs to reduce the possibility of resonance as well as to ensure the grille cloth remains under tension without stretch marks.

To distinguish the 2812 and 2912 from their predecessors, there are cosmetic changes too. These changes improve the look of the speakers in domestic surroundings. As well as the new grille cloth, there are matching piano lacquered veneered panels on the top of the speakers and the sides of the base formed from high-density plywood to further damp frame resonances.

The shielding cover on the base is embossed with the Quad logo and all typography is now gold lacquer paint.

Leave a Reply