PS Audio: This all made my head hurt and I went home to have a beer.

Please share this...
Share on FacebookTweet about this on TwitterShare on RedditDigg thisShare on LinkedInEmail this to someone

Paul McGowan writes: I had accidentally stumbled on something interesting in my development of a new preamplifier: a 14 gauge small diameter power cable didn’t sound as good as a larger diameter 12 gauge power cable.  In an easily repeatable experiment I could change the amount of body and fullness in the music by simply changing power cables.

This made no sense on a number of levels: the preamp was not drawing any appreciable power from the wall and what the heck difference would 6 feet of cable make when I was connecting to several hundred feet of exposed copper wire in the wall of my lab?

As I looked a little closer I also noticed that the 12 gauge power cable was shielded and the 14 gauge was not.  Hmmmm.  I got another smaller gauge cable to try, only this time it too was shielded.  Bingo, the fullness of the sound was the same but something else had changed: there was an increased openness to the sound that wasn’t there with the original unshielded small cable.

So wire gauge seemed to have something to do with the fullness – heavier wire gave a fuller sound – and shielding also affected the sound – it opened up the soundstage.  This was all very mysterious and hurt my head to contemplate what I was hearing because it flew in the face of anything making sense.  So I decided to try a little experiment.

I went down to the local hardware store and bought male and female AC plug ends so I could build my own cables.  I then purchased two lengths of 12 gauge, 3-conductor cables – one was a stranded type like that found in the power cables I was using, the other a solid core copper wire like what was in my wall – and built two unshielded power cables.

To my great surprise they sounded quite different again – the stranded 12 gauge cable lost some of the openness I had heard while the solid core cable had gained even more body and openness than the stranded.  I figured that the unshielded stranded version “made sense” but the solid core?  The solid core is what’s in the wall and essentially what I had done is put an added 6 feet onto my lab’s power line.  How could that do anything?

The only logic I could come up with is that adding the 6 feet of solid core did nothing to the sound – but adding 6 feet of stranded onto the hundreds of feet of solid core in the walls – somehow degraded the sound of my preamp.

My conclusion was that one wasn’t better than the other – but rather – one was worse than essentially nothing.

This all made my head hurt and I went home to have a beer.

---//---

Hi. I’m Michael Vronsky - the Commercial Manager here. If you’d like details of where to buy PS AUDIO equipment AT SPECIAL PRICES (but only for our members) then please contact me at commercial@hifianswers.com Thanks. Michael.

Please share this...
Share on FacebookTweet about this on TwitterShare on RedditDigg thisShare on LinkedInEmail this to someone